Linear DXS-64 Manuel d'utilisateur télécharger pdf

DXS-64

SUPERVISED

EMERGENCY

TRANSMITTER

Operation

Instructions

PRODUCT DESCRIPTION

The Model DXS-64 is a battery powered, miniature, water-resistant*, supervised

transmitter designed for use in emergency applications with Linear’s DX and DXS

format receivers. The transmitter is supplied with a nylon pendant necklace with a

breakaway feature for added safety. Pressing the button on the transmitter sends

a digital coded wireless signal to its companion receiver. To insure sending

a complete signal, press the transmitter button for a minimum

of two seconds.

The DXS-64 transmitter is factory set to a unique code, so no ﬁ eld coding is

required. The DXS-64 sends a signal when its button is pressed. The transmitter

can send a signal for up to 30 seconds per activation. The red signal indicator on

the transmitter lights when the unit is activated.

If status transmissions are enabled, they will be sent every two hours. Some

receivers are able to use these signals, others are not.

Every two hours the transmitter tests for a low battery. This test takes place even if

status transmissions have not been enabled. If the battery tests low, a low battery

signal is sent and the transmitter LED ﬂ ashes.

Receivers must be programmed to the transmitter’s code before system testing

and operation. Refer to the receiver’s instructions for details on operation and

programming.

Each transmitter is sealed to provide water-resistance. The unit’s battery is not

replaceable. The transmitter should be discarded at the end of its battery life.

* NOTE: Water resistance not tested by UL

FEATURES

STATUS OPTION & PROGRAMMING SYSTEM TESTING LINEAR LIMITED WARRANTY

This Linear product is warranted against defects in material and workmanship for twenty-four (24) months.

The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale

customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not

warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature

of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear LLC for

consequential damages arising out of or in connection with use or performance of this product

or other indirect damages with respect to loss of property, revenue, or proﬁ t, or cost of removal,

installation, or reinstallation. All implied warranties, including implied warranties for merchantability and

implied warranties for ﬁ tness, are valid only until Warranty Expiration Date as labeled on the product. This

Linear LLC Warranty is in lieu of all other warranties express or implied.

All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact

Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.

IMPORTANT !!!

Linear radio controls provide a reliable communications link and ﬁ ll an important need in portable wireless

signaling. However, there are some limitations which must be observed.

 For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as

Part 15 devices. As such, they have limited transmitter power and therefore limited range.

 A receiver cannot respond to more than one transmitted signal at a time and may be blocked by

radio signals that occur on or near their operating frequencies, regardless of code settings.

 Changes or modiﬁ cations to the device may void FCC compliance.

 Infrequently used radio links should be tested regularly to protect against undetected interference or

fault.

 A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale

distributor or dealer, and these facts should be communicated to the ultimate users.

This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference and (2) this device must

accept any interference received, including interference that may cause undesired operation.

(760) 438-7000

USA & Canada (800) 421-1587 & (800) 392-0123

Toll Free FAX (800) 468-1340

www.linearcorp.com

IF THE TWO HOUR STATUS TIMER IS DESIRED FOR SUPERVISION,

PERMANENTLY ENABLE THE TIMER BY PRESSING THE TRANSMITTER

BUTTON FIVE TIMES IN SUCCESSION WITHIN 3 TO 4 SECONDS.

PROGRAM THE TRANSMITTER INTO THE RECEIVER BY PLACING THE

RECEIVER INTO PROGRAM MODE. THEN SEND A SIGNAL TO THE RECEIVER

FROM THE TRANSMITTER. REFER TO THE RECEIVERS PROGRAMMING

INSTRUCTIONS FOR DETAILS.

THE MANUFACTURER STRONGLY RECOMMENDS THAT YOU

TEST SECURITY EQUIPMENT FREQUENTLY. OVER A PERIOD OF

TIME, NO ELECTRONIC PRODUCT IS BETTER THAN THE

INSPECTION AND MAINTENANCE IT RECEIVES. THEREFORE,

FROM THE TIME OF INSTALLATION, IT IS ABSOLUTELY

NECESSARY TO TEST THE SYSTEM AT LEAST ONCE A WEEK.

IMPORTANT! TEST SYSTEM WEEKLY

PLACE THE RECEIVER IN "TEST" MODE

AND ACTIVATE THE TRANSMITTER.

VERIFY THAT THE SIGNAL IS RECEIVED

AND THAT THE SYSTEMS REPORTS AS

REQUIRED.

ACTIVATION

BUTTON

SIGNAL

INDICATOR

NYLON

NECK

CORD

LENGTH

ADJUSTMENT

SNAP

CORD

RELEASE

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,DXS-64 - LINEAR P/N: 224801 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 5.500” - FOLDING: 3 FOLD ALTERNATE, FINISH WITH LOGO SHOWING - SCALE: 1-1

Résumé du contenu

Page 1 - Instructions

DXS-64SUPERVISEDEMERGENCYTRANSMITTEROperation InstructionsPRODUCT DESCRIPTIONThe Model DXS-64 is a battery powered, miniature, water-resistant*, super

Commentaires sur ces manuels

Pas de commentaire

Linear DXS-64 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Satellite Linear DXS-64. Linear DXS-64 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Satellite Linear DXS-64